I have an Arrow K2000.In the instruction manual it says that if you want to get the rear hub to come in past the innermost line on the axle,you have to give them a tap to remove the circlip that is on the hub.I've tried with no luck.Any pointers?.
Thanks in advance
David
Thanks in advance
David
Views: 28
Comments2
What size axle?. If itis 40mm,then the hub will only go in until it hits the end of the axle, or the key, whichever stops it first.
If you want to get it in further, then you need to bore the outer end of the hub out to 40mm, and then locate the wheel on the axle. But you won't be able to move the hubs out past 5mm in from the end of the axle, as you must have the hub on the axle to locate it properly.
Terry Sheedy
Thanks for that
Terry Sheedy said:What size axle?. If itis 40mm,then the hub will only go in until it hits the end of the axle, or the key, whichever stops it first.If you want to get it in further, then you need to bore the outer end of the hub out to 40mm, and then locate the wheel on the axle. But you won't be able to move the hubs out past 5mm in from the end of the axle, as you must have the hub on the axle to locate it properly.Terry Sheedy