Hi everyone
The TaG Super Series is on at the Creek next round please make sure you have the right restrictor in as they will be checked.
2009 AKA MANUAL
ADDENDUM No.21
Issued: 5
th June 2009
At the NKC meeting held 27
th/28th /29th March, 2009, the following was approved for
implementation from 1
st June, 2009.
32.06 AKA Restrictor Plates
Are compulsory and as determined by the AKA and subject to any future parity
adjustments and as per the following AKA restrictor plate dimensions listed below.
The restrictor plate must be supplied by the AKA and must be fitted between the
cylinder and exhaust header pipe or flange with a gasket on both sides of the
restrictor plate and be located on all exhaust header studs and bolts. All exhaust
gases must pass through the restrictor plate opening.
PRD Fireball 125
– Max x 24.50mm marked AKA F1
Rotax Max 125
– Max x 24.50mm marked AKA SR2
Rotax Junior Max 125
– Max x 26.00mm marked AKA JR1
SQ Cheetah 125
– Max x 25.00mm marked AKA SQ1
NOTE:
Parilla Leopard 125 - The Selettra 4 pole and Selettra digital K ignition sytems must
use the Max x 23.00mm marked AKAL1.
Parilla Leopard 125
– with the Selettra digital K ignition green module AKA20L must
use the max x 23.80mm marked AKAL2
Refer to AKA National and State Offices / websites and any issued addendums for
current information.
It is compulsory that sealable nuts / bolts be fitted on exhaust studs for restrictor plate
sealing. Minimum hole size 2mm.
New restrictor plates will only be available from the relevant State Secretaries.
“
New size” restrictor plates will be issued to current competitors on presentation of
their current deleted size restrictor plate.
N:\AKA\ADDENDUMS\2009\Add 21 - Restrictors\_ADDENDUM-REWORD 21__20091 (4)Modified.doc
Date Created: June 09
Page 1 of 1
AKA INC.
Pam Arnett
National Secretary
Australian Karting Association
The TaG Super Series is on at the Creek next round please make sure you have the right restrictor in as they will be checked.
2009 AKA MANUAL
ADDENDUM No.21
Issued: 5
th June 2009
At the NKC meeting held 27
th/28th /29th March, 2009, the following was approved for
implementation from 1
st June, 2009.
32.06 AKA Restrictor Plates
Are compulsory and as determined by the AKA and subject to any future parity
adjustments and as per the following AKA restrictor plate dimensions listed below.
The restrictor plate must be supplied by the AKA and must be fitted between the
cylinder and exhaust header pipe or flange with a gasket on both sides of the
restrictor plate and be located on all exhaust header studs and bolts. All exhaust
gases must pass through the restrictor plate opening.
PRD Fireball 125
– Max x 24.50mm marked AKA F1
Rotax Max 125
– Max x 24.50mm marked AKA SR2
Rotax Junior Max 125
– Max x 26.00mm marked AKA JR1
SQ Cheetah 125
– Max x 25.00mm marked AKA SQ1
NOTE:
Parilla Leopard 125 - The Selettra 4 pole and Selettra digital K ignition sytems must
use the Max x 23.00mm marked AKAL1.
Parilla Leopard 125
– with the Selettra digital K ignition green module AKA20L must
use the max x 23.80mm marked AKAL2
Refer to AKA National and State Offices / websites and any issued addendums for
current information.
It is compulsory that sealable nuts / bolts be fitted on exhaust studs for restrictor plate
sealing. Minimum hole size 2mm.
New restrictor plates will only be available from the relevant State Secretaries.
“
New size” restrictor plates will be issued to current competitors on presentation of
their current deleted size restrictor plate.
N:\AKA\ADDENDUMS\2009\Add 21 - Restrictors\_ADDENDUM-REWORD 21__20091 (4)Modified.doc
Date Created: June 09
Page 1 of 1
AKA INC.
Pam Arnett
National Secretary
Australian Karting Association
Views: 14
Comments2
So does this mean they are out now???
Yes mate they are available NOW !!!!!! from the state office