HI,
My Max has developed an issue with regards to starting. Nothing wrong with the engine itself, however the electrical wiring loom (which also has never been a problem) is showing no volts on my voltmeter when the start button is pushed. I have checked the connections and can find no obvious breakages and it was earthed correctly at the time. The battery was also fully charged at the time.Does anyone have any ideas?
Please help.
I did not find the right solution from the internet.
References:-
http://www.karting1.co.uk/forum/viewtopic.php?t=19374&sid=53942...
Thanks
Comments2
You did not say if it is an EVO or earlier model, so I assume it is an earlier one since you are pressing the starter button. ?
Next to test is the starter button itself. Disconnect it from the wires and put a meter across the spade terminals, then button up is no connection and button down they are connected.
Do you have the loom connected directly onto battery or do you have a connection break? If so, i'd connect directly to battery as i had similar issues and they were due to the deans connector i had.