There are many good engine builders...Kip Foster, Flatout, J&A., Hurst ..ect ect basically take your pick
I am not biased or anything but HURST do my two J motors and my two clubby's and I have never had any issues with the motors. They put out good power and perform well.
Piper, although he is insanely flat out from what I hear.
CC Racing also build a mean J.
er ! on June 15, 2009 at 19:56
haha PIPER i vote PIPER hahahaha :D
Agree I would say Piper but he is flatout ....
Nah, definately Hurst for J motors. The boys their have put out some very fast J motors and don't charge an arm and a leg.
They also have their own Dyno which they send you a copy of your data and they also take all the guess work out of jet settings and pipe length, telling u everything u need to know...
Depends where you are.
we live in Melbourne and we use CC Racing, they know how to build a ripper J and have been churning out great rebuilds since we started. also, a lot of my mates have their engines done by A1 or J&A.
all engines can be seen at the front, and until you are really racing for big placings, you can't go wrong with any builder.
That's great Lorraine I have one we just left there today for Troy so tell him to build me a little ripper
Lorraine Farley said:Nah, definately Hurst for J motors. The boys their have put out some very fast J motors and don't charge an arm and a leg.They also have their own Dyno which they send you a copy of your data and they also take all the guess work out of jet settings and pipe length, telling u everything u need to know...
we like to use a mix of builders..BUT one rule we stand by who ever builds that motor is where it goes back to.....shows the builder that you are loyal and they will always do the best for you. So if it's Piper motor goes back to Piper, if it's Hurst goes back to Hurst, if Kartforce or J&A.....you get what I mean only one exception to this rule...
..If their customer service is BAD and they have no time for you then find some-one who does..
Thanks.I googled Hurst Racing Engines but could not find it.Have you contact details?
Thanks
Lorraine Farley said:Nah, definately Hurst for J motors. The boys their have put out some very fast J motors and don't charge an arm and a leg.They also have their own Dyno which they send you a copy of your data and they also take all the guess work out of jet settings and pipe length, telling u everything u need to know...
Comments12
Hi David
There are many good engine builders...Kip Foster, Flatout, J&A., Hurst ..ect ect basically take your pick
I am not biased or anything but HURST do my two J motors and my two clubby's and I have never had any issues with the motors. They put out good power and perform well.
Piper, although he is insanely flat out from what I hear.
CC Racing also build a mean J.
er ! on June 15, 2009 at 19:56
haha PIPER i vote PIPER hahahaha :D
Agree I would say Piper but he is flatout ....
Nah, definately Hurst for J motors. The boys their have put out some very fast J motors and don't charge an arm and a leg.
They also have their own Dyno which they send you a copy of your data and they also take all the guess work out of jet settings and pipe length, telling u everything u need to know...
Depends where you are.
we live in Melbourne and we use CC Racing, they know how to build a ripper J and have been churning out great rebuilds since we started. also, a lot of my mates have their engines done by A1 or J&A.
all engines can be seen at the front, and until you are really racing for big placings, you can't go wrong with any builder.
That's great Lorraine I have one we just left there today for Troy so tell him to build me a little ripper
Lorraine Farley said:Nah, definately Hurst for J motors. The boys their have put out some very fast J motors and don't charge an arm and a leg.They also have their own Dyno which they send you a copy of your data and they also take all the guess work out of jet settings and pipe length, telling u everything u need to know...
we like to use a mix of builders..BUT one rule we stand by who ever builds that motor is where it goes back to.....shows the builder that you are loyal and they will always do the best for you. So if it's Piper motor goes back to Piper, if it's Hurst goes back to Hurst, if Kartforce or J&A.....you get what I mean only one exception to this rule...
..If their customer service is BAD and they have no time for you then find some-one who does..
Thanks.I googled Hurst Racing Engines but could not find it.Have you contact details?
Thanks
Lorraine Farley said:Nah, definately Hurst for J motors. The boys their have put out some very fast J motors and don't charge an arm and a leg.They also have their own Dyno which they send you a copy of your data and they also take all the guess work out of jet settings and pipe length, telling u everything u need to know...
Ring Kart1 they handle HURST (02) 9672 7523 email sales@kartone.com.au
You can contact Hurst directly on 0450 380 005.