Pretty straight foward sale here.
My reason for sale is prettys simple, I'm going Sportsman unrestricted.
The motor was rebuilt at the start of the year, it's done a few practice sessions, Febuary club day, March Clubday, and the Val and Joyce Findley memorial just gone.
It's a good motor, and has done well to me, generally pulls well up top. At the all star's at Geelong last year I was only a couple of tenth's off running pace, pulled well down the straight against them, was only my setup/lack of driving skills that was slowing me down.
Engine has been maintained by Ultimate Karting - Andrew Purcell, it has recently had the stator, tci unit and plug cap replaced, the motor is now on it's 2nd stator, the first time the stator went was at the 2010 Country Series Hamilton, I replaced it with a second hand unit. On November clubday last year the TCI unit went, I replaced that with a brand new aftermarket unit rather than a Genuine Yamaha unit, as the aftermarket ones are a little cheaper. On Febuary clubday the second hand stator I fitted after the Hamilton round in 2010 then went, so this time I replaced the stator with a brand new unit, along with a brand new plug for good measure.
So a basic summary of that above paragraph is that while it's had it's ignition issues, everything on the ignition side as now just about brand new, so there shouldn't be ANY issue's on the ignition side of things for a while to come!
The motor comes with a powermac header, with an Alfano Bung for if you use a Lambda Sensor/Tuning lights or an Exhuast temp sensor, and I'll also throw in my clubman airbox and Throttle cable and such if needed, unfortunatly I can't supply an exhuast for it though.
I'm open to reasonable offer's and I'm willing to negotiate, but I would preferably like a quick sale.
I'm located in Bannockburn, Victoria, I'm happy to post the motor interstate but it'll naturally be at buyers expense.
Some picture's will be up later this evening.
EDIT:
Photo's are now up.
Comments12
And as per normal I've forgotten a couple of details.... DOH!!!Phone number:Â 0402 536 970Email:Â btnhjim@hotmail.com
Just thought of something that's worth mentioning, I just remembered that when before running the motor in I actually worked out how to reset the counter on my Alfano Pro +, so I've just taken a photo of my alfano showing how many hours it's done.As you can see in the photo, it has done precisely 3 hours and 29 minutes, including running in time.
Attachments:
IMG_5696.JPG, 445 KB
Ill even through in my 40x90 righidi ridolfi rear hubs, my 40mm sprocket carrier and my 40x1040 prodezine medium axle in free of charge!!!James Head said:Just thought of something that's worth mentioning, I just remembered that when before running the motor in I actually worked out how to reset the counter on my Alfano Pro +, so I've just taken a photo of my alfano showing how many hours it's done.As you can see in the photo, it has done precisely 3 hours and 29 minutes, including running in time.
Has it been Blueprinted?
It certainly has Dylan. Dylan Peters said:
Has it been Blueprinted?
Would you take $850?
Â
Email me at wilko_wilkinson1@hotmail.com
Â
Cheers Josh
Hi Guy's,
Â
If there have been any people out there sending me text messages about the motor, can you please send your enquiry's and offer's here, or ring my number, or send me an email. For some reason my phone is no longer recieving any text messages, I will be doing my best tomorrow to be rectifying the problem, so sit tight peoples.Cheer's guys, and sorry for any inconvenience.
Problem fixed!!!You may now all send any enquiry's/offer's to me via text messageing now if you guy's wish too =)Cheer's peoples James Head said:
Hi Guy's,
Â
If there have been any people out there sending me text messages about the motor, can you please send your enquiry's and offer's here, or ring my number, or send me an email. For some reason my phone is no longer recieving any text messages, I will be doing my best tomorrow to be rectifying the problem, so sit tight peoples.Cheer's guys, and sorry for any inconvenience.
ould on April 23, 2012 at 16:22
james, can i please get a price on that m axel and the header pipeÂ
Hi Matthew, please refer to my post I've just posted on your kartbook wall.I'm waiting to here back from Josh Wilkinson, I've just sent him a email with postage quotes, he may or may not take the lot.As soon as I hear from him I'll let you know, if he doesn't take the axle assembly I'll let the axle go on it's own for $75.Cheer's dude! =)
EDIT:Â Mark has just informed me that he has 2 standard Yamaha exhaust pipes, he say's you may have those for free if you wish, he doesn't have any spare powermac header's though I'm afraid.
ould on April 23, 2012 at 23:00
give me a text james asap 0419501061
Engine has been sold!The axle assembly has gone with it too.I now also have a cylinder head temp sensor along with a brand new extension cable for it. $85 including postage, it's the Pro+ LV type.