hey all,
a friend of mine with a AX9 B-max, rotax, is running his 1st meeting at wollongong(super series).
whats a decent starting setup for that track(gear ratio, axle widths-front & rear, camber castor)?
i can setup his kart to basic arrow factory settings, but i would like to get a decent base setup to start with.
any help would be greatly appreciated.
duvashen..
a friend of mine with a AX9 B-max, rotax, is running his 1st meeting at wollongong(super series).
whats a decent starting setup for that track(gear ratio, axle widths-front & rear, camber castor)?
i can setup his kart to basic arrow factory settings, but i would like to get a decent base setup to start with.
any help would be greatly appreciated.
duvashen..
Views: 137
Comments5
forgot to mention, tyres are mg yellows
Ha Ha best set up is race somewhere else.................. sorry couldn't resist. Bad Galvo Bad.....
Duvashen Padayachee said:forgot to mention, tyres are mg yellows
if light, 12:81
1385-1390mm at the rear, 3-4 spacers at the front (or more if you want to take some caster out).
perhaps even raise the ride height a little... if the seat protrudes much below the frame, he may want a little more clearance for the kerbs.
haha galvo,
i stopped racing there, but my mate just started, and doesnt want to start out in aka events(dont ask me why...)
thanks kasper for the info, i'll it to him.
woolongong hahahaha dude just hit those curbs like no tommorow aye galvo!